JLG M400 Operator Manual - Manual (Page 55)

SECTION 4 - MACHINE OPERATION
3121215 – JLG Lift – 4-9
Platform Level Adjustment
1. Leveling UP. Depress footswitch to raise platform, posi-
tion PLATFORM/LEVEL control switch UP and hold until
platform is level.
2. Leveling DOWN. Depress footswitch to lower platform,
position PLATFORM/LEVEL control switch to DOWN
and hold until platform is level.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD
CAUSE THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO SO
COULD RESULT IN DEATH OR SERIOUS INJURY.
Platform Rotation
1. Depress footswitch to rotate platform to the left, PLAT-
FORM ROTATE control switch is positioned to the LEFT
and held until desired position is reached.
2. Depress footswitch to rotate platform to the right, PLAT-
FORM ROTATE control switch is positioned to the
RIGHT and held until desired position is reached.
Jib Swing
1. Depress footswitch to rotate Jib and platform to the left,
JIB SWING control switch is positioned to the LEFT and
held until desired position is reached.
2. Depress footswitch to rotate Jib and platform to the
right, JIB SWING control switch is positioned to the
RIGHT and held until desired position is reached.