Dual fork positioning carriage, Dual fork positioning carriage -24 – JLG G12-55A Operator Manual User Manual
Page 98
Advertising
Section 5 - Attachments
5-24
3126018
Dual Fork Positioning Carriage
Use Carriage Load Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-6.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls fork tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
To Fork Position:
The auxiliary hydraulic joystick (3) controls fork position.
• Move joystick left to shift forks in.
• Move joystick right to shift forks out.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-13.
OZ3670
OY3120
2
1
3
Advertising
This manual is related to the following products: