Echo CH45342 Owners Manual v.2 - Manual (Page 8)

4.5 INCH CHIPPER 4
SAFETY
1.9 SaFETY dECaLS
CHeCk BlaDe BoltS
FoR pRopeR toRQue
aFteR eVeRy 8 HouRS oF
opeRatIon. CHeCk BlaDeS
anD Rotate oR ReSHaRpen
DaIly oR aS ReQuIReD
to keep BlaDeS SHaRp. ReFeR to oWneRS Manual
FoR InStRuCtIonS. FaIluRe to Do So May CauSe pooR
peRFoRManCe, DaMaGe oR peRSonal InJuRy anD WIll VoID
tHe MaCHIne WaRRanty.
pN 14942-00
8
3
ReaD anD unDeRStanD tHIS
oWneR/opeRatoRS Manual.
Be CoMpletely FaMIlIaR
WItH tHe ContRolS anD
tHe pRopeR uSe oF tHIS
eQuIpMent
oBtaIn anD WeaR SaFety
GlaSSeS anD uSe HeaRInG
pRoteCtIon at all tIMeS
WHen opeRatInG tHIS
MaCHIne.
BeFoRe InSpeCtInG oR
SeRVICInG any paRt oF tHIS
MaCHIne, SHut oFF poWeR
SouRCe, DISConneCt SpaRk
pluG WIRe FRoM SpaRk pluG
anD Make SuRe all MoVInG
paRtS HaVe CoMe to a
CoMplete Stop.
p/N 12172
keep HanDS anD Feet out
oF Inlet anD DISCHaRGe
openInGS WHIle MaCHIne
IS opeRatInG to aVoID
SeRIouS peRSonal InJuRy.
Stop anD alloW MaCHIne
to CoMe to a CoMplete
Stop BeFoRe CleaRInG
oBStRuCtIonS.
p/N 12175
6
p/N 12250 7
pN 12168
1
ContaCt WItH RotatInG
DRIVelIne Can CauSe
DeatH. Do not opeRate
WItHout all DRIVelIne,
tRaCtoR anD eQuIpMent
SHIelDS In plaCe. enSuRe
tHe DRIVelIne IS SeCuRely
attaCHeD at BotH enDS
anD DRIVelIne SHIelDS
tHat tuRn FReely on tHe
DRIVelIne aRe In plaCe.
pN 12174
Do not opeRate MaCHIne WItHout
SHIelDS In plaCe. FaIluRe to Do So May
CauSe SeRIouS InJuRy oR DeatH.
5
2 pN 12169
keep HanDS anD Feet
out oF Inlet anD
DISCHaRGe openInGS WHIle
MaCHIne IS opeRatInG to aVoID
SeRIouS peRSonal InJuRy. Stop
anD alloW MaCHIne to CoMe to a
CoMplete Stop BeFoRe CleaRInG
oBStRuCtIonS.
4 pN 12173
Do not opeRate tHIS
eQuIpMent In tHe VICInIty
oF ByStanDeRS. Do not
alloW CHIlDRen to opeRate
tHIS eQuIpMent. alWayS
StanD CleaR oF DISCHaRGe
aRea WHen opeRatInG tHIS
MaCHIne. keep FaCe anD BoDy
aWay FRoM DISCHaRGe aReaS.
1.9 SaFETY dECaLS
pN 12169
pN 14942-00
pN 12168 pN 12173
pN 12174
pN 12175
pN 12250
pN 12172
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.