Echo CH45342 Owners Manual v.1 - Manual (Page 13)

4.5 INCH CHIPPER
9
ENGLISH
ASSEMBLY
Model CH45390 can be reconfigured so the axle is under
the engine and the discharge is right above the hitch. this
configuration is convenient for:
lightening the weight over the hitch or •
Directing discharged materials into a pickup bed •
using the optional Elevated Discharge Tube kit
(PN 74634-00). See figure 2.12.
Follow these steps to reconfigure the CH45390:
Disconnect the axle and fenders from the chipper by 1.
removing the 1" and 1-1/4" bolts on each side.
Disconnect the hitch from the trailer.
2.
Remove the bolts connecting the RH and lH light 3.
brackets to the trailer. The lH light bracket is the larger
one that has the license plate light attached to it. the
lH light bracket must also be disconnected from the
fender mount.
Hoist the trailer up and turn it 180 degrees.
4.
locate the holes on the sides of the trailer 5. closest
to the engine. align these holes with the top holes on
the axle support brackets located on the axle. attach
with one 3/8" x 1" bolt and one 3/8" x 1-1/4" bolt on
each side.
Reattach the hitch and light brackets to the trailer.
6.
test the blinker and brake lights to ensure the wiring 7.
is properly connected.
Figure 2.12, optional trailer configuration (shown here with optional Discharge tube Kit, PN 74634-00)
2.9 opTIoNaL CoNFIGuRaTIoN FoR modEL CH45390
Figure 2.11, Detaching light brackets, axle, and hitch