2n® stargate, Basic dimensions, Front side division – 2N StarGate/BlueTower v5.3 User Manual

Page 9

Advertising
background image

9

2N TELEKOMUNIKACE a.s., www.2n.cz

®

2N® StarGate

Basic Dimensions

2N StarGate

®

  is  the  biggest  GSM  gateway  in  the  2N   PRI  gateway  family.  The

®

system  is  integrated  in  a  19"  subrack  of  the  height  of  3U  and  depth  of  360mm.  The
front side is open, equipped with slots for plug–in boards with front panels. The panel
includes the main switch. In case not all GSM / UMTS cards are plugged in, the vacant
front section must be covered with a fixed panel(s).

The  whole  backside  is  covered  with  a  panel  with  a  built–in  active  fan,  which  is
automatically switched on whenever the power supply temperature exceeds 70°C. The
main power supply unit is located in front of the fan. The bottom and upper sides are
covered by perforated sheet and the assembly flanges are provided with handrails.

The system bus is designed as a printed circuit board (PCB) with DIN connectors and
fitted to the inner subrack carrier profiles.

Front Side Division

The subrack width is divided into an 8HP–wide mains panel and 19x4HP–wide modules
in the following sequence (from right to left):

VoIP version

Fixed panel with a main switch (AC type) or power connectors (DC
type)

8HP

VoIP card

4HP

Basic or enhanced CPU card

4HP

Empty position

4HP

GSM or UMTS cards (one for two GSM / UMTS channels)

Remaining
space 

(each

4HP)

ISDN version

Fixed panel with a main switch (AC type) or power connectors (DC
type)

8HP

Empty position

4HP

Basic or enhanced CPU card

4HP

1ISDN PRI or 2ISDN PRI card

4HP

GSM or UMTS cards (one for two GSM / UMTS channels)

Remaining
space 

(each

4HP)

Advertising