Allworx for iOS - Manual (Page 18)

Reach for iOS 1.1 User Guide
Page 10 Toll Free 1-800-ALLWORX * 585-421-3850
wwww.allworx.com
Revised: 6/10/14
2. Tap the Do Not Disturb option. A blue mark displays next to the Presence and Do Not
Disturb options.
3. Tap Done to exit the screen. The iPhone screen displays the current presence and
DND that indicates DND is active.
To turn the DND option off, repeat steps 1, 2, and 3.
4.3 Intercom
1. Tap Intercom. Dial the Allworx user extension, and then tap the Call active call icon.
For the iPhone, locate the Intercom option on the Phone tab.
2. Start talking when the device displays Active Call. The user of the dialed extension
hears the caller.
3. Press the red handset action icon or the End active call icon. To deny an incoming
Intercom request, tap Ignore.
4.4 Volume Control and Audio Route
The volume slide bar enables the user to increase or decrease the specific iOS audio
route volume currently in use. When switching from one route to another (i.e., Handset to
Speaker) the application maintains a different volume level for each route.
iPhone: Tap the audio route ( ) action icon; slide the radio button to the left to
decrease the volume or to the right to increase the volume.
iPad: Located on the lower, right side of the device; slide the radio button above the
Audio Route to the left to decrease the volume or to the right to increase the volume.
Next to the volume slide bar is an audio route action icon, if there is more than one
available audio route. Tap this action icon to select the preferred audio route such
handset, speaker, or Bluetooth. The indicator displays the current, active audio.
• Bluetooth • Handset (iPhone only)
• Speaker • Headphones