Ram expansion, See “ram expansion” in chapter 5, Ram expansion” of chapter 5 – Brother HL-2600CN Series User Manual
Page 175
CHAPTER 5 MAINTENANCE
5-63
R
R
R
A
A
A
M
M
M
E
E
E
X
X
X
P
P
P
A
A
A
N
N
N
S
S
S
I
I
I
O
O
O
N
N
N
This printer has 64 Mbytes of standard memory and 3 slots for optional
expansion memory. The memory can be expanded by 384 Mbytes by
installing commercially available dual in-line memory modules (DIMMs).
(The standard memory fitted can vary depending on the printer model and
the country.)
This printer uses memory modules that are:-
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM, or
DIMM that uses 16Mbit SDRAM.
The following capacity of DIMM can be installed:
<Europe>
•
16 Mbyte
BUFFALO TECHNOLOGY 12323-0001
•
32 Mbyte
BUFFALO TECHNOLOGY 12324-0001
•
64 Mbyte
BUFFALO TECHNOLOGY 12325-0001
•
128 Mbyte BUFFALO TECHNOLOGY 12326-0001
<US>
•
16 Mbyte
TECHWORKS 12456-0001
•
32 Mbyte
TECHWORKS 12457-0001
•
64 Mbyte
TECHWORKS 12458-0001
•
128 Mbyte TECHWORKS 12459-0001
In general, the DIMM must have the following specifications:
Type:
100 pin and 32 bit output
CAS Latency:
2
Clock Frequency:
66Mhz or more
Capacity:
16,32,64 or 128 Mbyte
Height:
46mm (1.8 inches) or less
Parity:
NONE
Dram Type:
64 M bit SDRAM 4 Bank SDRAM can be used.