ElmoMC SimplIQ Digital Servo Drives-Whistle Installation Guide - Manual (Page 19)

Whistle and Tweeter Installation Guide Installation
MAN-WHTWIG (Ver. 1.604)
www.elmomc.com
19
3.3.2.2. Connector J2
Pin (J2) Signal Function
1 +5V Encoder/Hall +5V supply voltage
Maximum output current: 200 mA
2 SUPRET Supply return
3 ANALIN1+ Analog input 1+
4 ANALIN1- Analog input 1-
5 CHA Channel A input
6 CHA- Channel A input complement
7 CHB Channel B input
8 CHB- Channel B input complement
9 INDEX+ Index input
10 INDEX- Index input complement
11 HA Hall sensor A input
12 HB Hall sensor B input
13 HC Hall sensor C input
14 LED_2_OUT Bi-color indication output 2 (Cathode)
15 LED_1_OUT Bi-color indication output 1 (Anode)