INFICON HAPSITE ER Chemical Identification System - Manual (Page 234)

7 - 8
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
6 Highlight default.tun. Click OK. See Figure 7-12 .
NOTE: This will overwrite the default.tun file. If an overwrite is not
desired, see section 10.3 on page 10-11 for information on this subject.
Figure 7-12 Save "default.tun"
7 Replace the existing default.tun file when prompted.
8 Reboot HAPSITE from the front panel MAIN menu. Refer to section 3.8, EXIT
Menu, on page 3-59 for more information on how to reboot the HAPSITE.
9 If the HAPSITE fails to tune after steps 1-9 have been performed. See section
7.6, Performing Manual Tune, on page 7-25 for information on performing a
Manual Tune.