INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 24)

2 - 4
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
To remove the existing WinDriver and install the required WinDriver:
1 In Windows Device Manager, click the expansion button () next to Jungo to
display WinDriver. See
Figure 2-2 .
Figure 2-2 Jungo and WinDriver
2 Right-click WinDriver and click Uninstall. See Figure 2-3 .
Figure 2-3 Uninstall WinDriver
3 When the Confirm Device Uninstall window appears, click OK to uninstall
WinDriver. See
Figure 2-4 .
Figure 2-4 Confirm Device Uninstall
4 In the WDREG Error window, click Retry to continue with the DLL installation.
Refer to
Figure 2-1 .
If the Windows Installer window appears (see Figure 2-5 ), another DLL
(IQM233 DLL or SQM242 with IQM DLL) is already installed. IQM233 DLL
and SQM242 with IQM DLL cannot be installed together on the same
computer.