INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 31)

2 - 11
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.1.2 Open
Click File >> Open to display the Load Configuration window (see Figure 2-10 )
where a previously saved configuration file containing a set of parameters used for
a previous deposition can be selected and loaded.
Configuration files are in .xml format. InitConfig.xml is loaded when
IQS-233 Codeposition software is started. Once the software is running, a different
configuration file can be selected and loaded. Another process can be selected
without altering the system parameters loaded by the configuration file (refer to
section 2.3.3.1.1 ).
Figure 2-10 Load Configuration window
CAUTION
Do not delete or alter the InitConfig.xml, Materials.xml,
Setup.xml, or Users.xml files located in the
C:\ProgramData\INFICON\IQS-233 Codeposition folder.
Do not move these files to another folder.