INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 37)

2 - 17
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.4 Exit
Click File >> Exit to display the Exit window (see Figure 2-14 ). When exiting the
software, changes made to the current Process, Film, and System parameters can
be saved to the configuration filename displayed in the Exit window by selecting
the Save any changes to (name).xml check box and clicking Yes. Refer to
section 2.3.3.1.4 on page 2-12 to save parameter changes to a different
configuration filename.
Figure 2-14 Exit window
2.3.3.5 Edit
Click Edit to display the list of Edit commands. See Figure 2-15 .
NOTE: The Edit commands are not available once a process is started or while a
process is running.
Figure 2-15 Edit items list
 Process, see section 2.3.3.5.1
 Films, see section 2.3.3.5.6 on page 2-28
 Materials, see section 2.3.3.5.12 on page 2-42
 System, see section 2.3.3.6 on page 2-44
 Security, see section 2.3.3.7 on page 2-61