6 comm tab – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual User Manual
Page 78
Advertising
2 - 58
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.6.6 Comm Tab
When controlling the IQS-233 Codeposition software from a remote computer, the
RS-232 or Ethernet communications are configured in the Comm tab. See
Figure 2-42 System Setup window - Comm tab
RS-232 pane
Enabled . . . . . . . . . . . . . . . Select the Enabled check box to activate RS-232
communications.
Port . . . . . . . . . . . . . . . . . . . COM#
Select the detected serial communication
port to be used for the RS-232
communications with another computer.
Baud Rate . . . . . . . . . . . . . . 4800, 9600, 19200, 38400, 57600, 115200
Select the Baud Rate to be used for RS-232
communications.
Advertising