INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 79)

2 - 59
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
Ethernet pane
Ethernet Enabled . . . . . . . . Select the Ethernet Enabled check box to activate
Ethernet communications.
Ping Enabled . . . . . . . . . . . Select the Ping Enabled check box to detect that the
connected computer can send/receive messages
without error.
Local Port . . . . . . . . . . . . . . 0 to 65536
Select the TCP/IP port to be used by the
IQS-233 Codeposition software for Ethernet
communications (1001 is a typical value, use -1 for
no Ethernet).
Local Name . . . . . . . . . . . . Displays the names of the local and remote
computers.
Local IP Address . . . . . . . . Displays the IP address (xxx.xxx.xxx.xxx) of the local
computer.
Remote Port . . . . . . . . . . . . Displays the TCP/IP port of the remote computer.
Remote IP Address . . . . . . Displays the IP address (xxx.xxx.xxx.xxx) of the
remote computer.