Sheet3, Drawing view6, Detail view l (1 : 8) – Kargo Master Fleet Headache Rack Louvered (35010) User Manual
Page 3: Drawing view10, Drawing view11, Drawing view14, Drawing view15, Drawing view16, Drawing view17, Drawing view18
Advertising
L
DETAIL D
Contact with front of bed
Tie Down Slot
Flange To Rear
FRONT
HARDWARE
(f)
1/2" x 2 1/2"
Button Head Bolt
2 each
(g)
3/8" x 2"
Flat Head Allen Bolt
2 each
(h)
3/8" x 1"
Plow Bolt
4 each
(k)
3/8"
Flange Nut
4 each
(m)
3/8" Hvy
Flat Washer
4 each
(i)
Stake Pocket "T"
Nut
2 each
STEP3:
Next fasten the headache rack
frame (-06) to the mounting brackets
(-03)(-04) with the bent flange on the
window slats facing to rear and side
tie down slots on (-03)(-04) facing to
rear shown in DETAIL D. Use button
head bolts (b) washers (c) and
nylock nuts (d). Next position
headache rack assembly over 3/8"
bolts protruding through foot plate
(-01)(-02) center and fasten with flat
washers (m) and nylock nuts (k).
Tighten all hardware.
For TECHNICAL SUPPORT CALL: 800-343-7486
Advertising
This manual is related to the following products: