Bose 3•2•1 Home Entertainment Systems - Manual (Page 18)

18
System Setup
English
S-video as an alternate means to connect to the TV
An S-video input jack, provided on many TVs, delivers a higher-quality TV picture than the
composite video output connection shown in Figure 16 on page 17.
To make this alternate connection, insert the end of an S-video cable from the TV into the
S-VIDEO OUTPUT on the media center. This cable may be purchased from your Bose ® dealer
or a local electronics retailer.
Note: Some older TVs with standard TV cable connectors do not have a composite video or
an S-video input. Such TVs are not compatible with any DVD players and require use of an RF
modulator for this connection, which is available at your local electronics store.
Note: If you use S-video to connect your cable box to the media center, you must also use
S-video to connect all other components (such as the TV and VCR) to the system.
Turning off the internal speakers in your TV
When you listen to TV audio through your 3•2•1 home entertainment system, the speakers in
your TV should not be on. Use the on-screen menu on your TV to locate the setting for
INTERNAL SPEAKERS and select OFF. (Refer to your TV owner’s guide for instructions).
Note: In some models, when the TV’s internal speakers are turned off, you may need to turn
up the TV’s volume by 75% to 100% in order to hear audio from the 3•2•1 home
entertainment system. (See your TV owner’s guide for details.)
If your TV does not have an option to turn off the internal speakers, reduce the volume on
your TV to its lowest setting.
book Page 18 Friday, August 29, 2003 9:20 AM
AM271966_00_V.pdf • August 18, 2003 AM271966_00_V.pdf • August 18, 2003 AM271966_00_V.pdf • August 18, 2003
AM271966_00_V.pdf August 18, 2003 AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003