MTS Hydraulic Power Unit Model 506-92 - Manual (Page 21)

Service 3-9
3.2 Service Adjustments
Service overview Figure 3-3 shows the location of the service components accessed for the
following procedures.
• output pressure adjustment
• dual-temperature switch adjustments
• low-level switch adjustment
• main pump low-inlet pressure switch adjustment
VW-G043G
pressure control - pump no. 1
pressure control - pump no. 2
low-level switch
back-up relief valve
low-inlet presssure switch
dual-temperature
switch adjustment
Figure 3-3. Location of Adjustment Components (HPU Side View)