MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 - Manual (Page 66)

Model 505.60 - 505.180 SilentFlo™ HPU 66
Model 505.60 HPU Main Display
Operation
Model 505.60 HPU Main Display
Main Panel Display Controls
Control Descriptions
Master Unit Controls
Stop button Turns off hydraulic pressure to the system. The button turns red when the HPU
is stopped.
Run/Low Pressure
button Turns each enabled pump on in low pressure mode. The button turns green
when it is on.
High Pressure
button Toggles each running pump between low and high pressure. The button turns
green when high pressure is selected and turns gray when low pressure is
selected.
Remote button Enables the interface with your system controller. When selected (green) your
system controller can turn the HPU on and off, select low and high pressure,
and monitor HPU status such as oil temperature, fluid level, and filter status.
When in Remote, the Run/Low Pressure and High Pressure buttons on the
user interface panel are disabled.
Auto Demand
(ROD) (optional)
button When selected (green) automatically controls pump operation as system
demand changes.
Pump Disabled
Buttons Pump Enabled
Buttons
Display Selector
Buttons
Master Unit
Controls