MTS Series 505G2 SilentFlo Hydraulic Power Unit Model 505G2-180 - Manual (Page 34)

Model 505.60—505.180 HPU Electrical, Hydraulic,
and Water Connections
1. Position the hydraulic power unit.
Caution:
Lifting the HPU in the middle of its chassis can strain the structural integrity of the HPU.
Do not lift the HPU in the middle of its chassis.
Lift the HPU from each end of the chassis, as shown in the next figure.
Description Item
When moving the HPU with an overhead lift, use a spreader bar to help
balance the weight. 1
When moving the HPU with a fork lift or pallet jack, lift the HPU from
both ends. 2
2. Determine where to put the HPU. Consider the following:
34 Series 505G2 SilentFlo™ Hydraulic Power Unit Product Information
Installation