Brother DCP 8065DN - Manual (Page 105)

Appendix A
93
A
Installation when using a Network Print Queue or Share
(printer driver only)
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you have
not configured the IP address, see
Chapter 2 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall
available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal
Firewall software.
1
Start the CD-ROM installation menu program according to the Quick Setup Guide.
2
Select the model name and your language (if necessary), and then click Install Optional Applications.
3
Click Printer Driver (Only).
4
Click Next in response to the Welcome message. Follow the on-screen instructions.
5
Select Standard Installation and click Next.
6
Select Network Shared Printer, and then click Next.
7
Select your printer’s queue, and then click OK.
Note
Contact your administarator if you are not sure about the location and name of the printer in the network.
8
Click Finish.