Brother DCP 8065DN - Manual (Page 69)

8
57
8
LDAP Operation (MFC-8860DN only)
Overview
LDAP operation allows you to search for information such as fax numbers and E-mail addresses from your
server. You can configure LDAP settings using a web browser.
Changing the LDAP configuration using a Browser
You can configure and change LDAP settings using a web browser. For more information, see Changing the
LDAP configuration using a Browser (MFC-8860DN only) on page 54.
LDAP operation using the control panel
1
Press Search.
2
Press
▲ or ▼ to select Server & Local.
3
Press OK.
4
Enter initial characters for your search by using the Dial Pad.
Note
■
You can enter up to 15 characters.
■
For more information on using the Dial Pad, see Entering Text on page 97.
5
Press Search or OK.
The LDAP search result will be shown on LCD before the local address book search result with . If
there is no match on the server and the local address book, the LCD will show Not Found for 2 seconds.
6
Press
▲ or ▼ to select.
To confirm details of the result information, highlight the result and press .
7
Press OK.
If the result includes both a fax number and an E-mail address, the machine will prompt you to press
▲
or
▼ to select and press OK.
8
Load your document and press Start.
▲
▲