Brother iPrint&Scan MFC-8950DW - Manual (Page 10)

Chapter 1
4
Sleep Time
1
The Sleep mode setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a fax or a
print job. The default setting is 3 minutes.
When the machine goes into Sleep mode, the
LCD backlight turns off.
a
Press Menu.
b
Press a or b to display
General Setup
.
Press General Setup.
c
Press a or b to display Ecology.
Press Ecology.
d
Press Sleep Time.
e
Using the dial pad on the Touchscreen,
enter the length of time (0-90 minutes)
the machine will remain idle before
entering Sleep mode.
Press OK.
f
Press Stop/Exit.
Deep Sleep mode
1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a fax or a print job.
When the machine is in Deep Sleep mode,
the LCD backlight is Off and the Home key is
dimmed.
If a wireless network is enabled, the machine
will not enter Deep Sleep mode.
For the procedure to disable the wireless
network uu Network User's Guide: Control
panel setup
If the machine has secure print data it will not
enter Deep Sleep mode.