Brother iPrint&Scan MFC-8950DW - Manual (Page 73)

Routine maintenance
67
A
Cleaning the drum unit
A
If your printout has black or white dots or
other repeating marks at 3.7 in. (94 mm)
intervals, the drum may have foreign
material, such as glue from a label stuck on
the drum surface. Follow the steps below to
solve the problem.
a
Make sure that the machine is in the
Ready mode.
b
Press Menu.
c
Press a or b to display
Print Reports
.
Press Print Reports.
d
Press a or b to display Drum Dot
Print
.
Press Drum Dot Print.
e
The machine will display
Press Start
. Press Start.
f
Leave the machine turned on for
10 minutes for the internal fan to cool
the extremely hot parts inside the
machine.
g
After the machine has cooled down, turn
off the machine’s power switch.
h
Press the front cover release button and
then open the front cover.
i
Take out the drum unit and toner
cartridge assembly.