Brother DCP-310CN - Manual (Page 6)

iv
Choosing a location
Place your DCP on a flat, stable surface that is free of vibration and
shocks, such as a desk. Put the DCP near a standard, grounded
electrical socket. Choose a location where the temperature remains
between 10° and 35°C.
Caution
■
Avoid placing your DCP in a high-traffic area.
■
Avoid placing your DCP on the carpet.
■
Do not place near heaters, air conditioners, water, chemicals, or
refrigerators.
■
Do not expose the DCP to direct sunlight, excessive heat,
moisture, or dust.
■
Do not connect your DCP to electrical sockets controlled by wall
switches or automatic timers.
■
Disruption of power can wipe out information in the DCP’s
memory.
■
Do not connect your DCP to electrical sockets on the same circuit
as large appliances or other equipment that might disrupt the
power supply.