Rockwell Automation 1756-DMF30 ControlLogix Drive Module-Instructions - Manual

Installation Instructions
Publication 1756-IN577B-EN-P – July 2001
ControlLogix™ Drive Module
(Catalog Numbers: 1756-DMD30 and 1756-DMF30)
The Drive Module mounts in a ControlLogix™ chassis. The
ControlLogix system must be mounted within a suitable enclosure to
prevent personal injury resulting from accessibility to live parts. The
interior of this enclosure must be accessible only by the use of a tool.
This industrial control equipment is intended to operate in a Pollution
Degree 2 environment, in overvoltage Category II applications, as
defined in IEC publication 664A, at altitudes up to 2000 meters
without derating.
To: See Page:
Obtain a User Manual 2
Identify Module Components 2
Removal and Insertion Under Power (RIUP) 3
Class 1 LED Product 3
Prevent Electrostatic Discharge 4
Compliance to European Union Directive 4
EMC Directive 4
Low Voltage Directive 5
Power Requirements 5
Install the Module 6
Connect the Fiber Optic Cables 8
Check the Indicators 9
Remove the Module 11
1756-DM Specifications 12
Hazardous Location Information 14