Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 53)

Installing/Removing Front Bezel Assembly Items 5–3
Publication 6182-UM001D-EN-P
To disassemble the front bezel (12.1 in. display with keypad):
1. Disconnect the keypad cable, touchscreen cable, backlight tube
connectors, and the backlight power supply cable as indicated in the
following figure:
2. Remove the 6 screws securing the metal cover to the frame.
3. If you are replacing the plastic bezel overlay or vertical legend
strips, remove the 10 screws securing the metal frame and lift the
metal frame away from the plastic bezel.
4. To reassemble the front bezel assembly, thread the keypad and
touchscreen cables through the hole in the metal frame.
5. Reconnect the keypad cable, touchscreen cable, backlight tube
connectors, and backlight power supply cable.
6. If you are replacing the plastic bezel overlay or vertical legend
strips, reinstall the 10 screws to attach the metal frame to the plastic
overlay assembly. Tighten the screws to a torque of 6 - 8 in–lbs (0.7 -
0.9 N•m).