Rockwell Automation 6182 Industrial Computer for the Windows CE Operating System - Manual (Page 58)

5–8 Installing/Removing Front Bezel Assembly Items
Publication 6182-UM001D-EN-P
To replace the vertical legend strips (7.7 in. & 12.1 in. versions):
1. Follow the procedures in this chapter to disassemble the front bezel.
2. Place the front bezel plastic overlay facedown on a flat surface.
Take care not to scratch the front overlay or display window. Locate
the two exposed legend strip tabs as shown.
3. To remove the legend strips, carefully pull on the exposed tab.
4. To the insert new legend strip, first slightly cup the strip and
carefully push it into the bezel slot. Short pushes will help slide the
new strip fully into place.
5. Verify the alignment of the legend strip text on the front overlay
keys. Adjust as needed by pushing or pulling slightly on the legend
strip tab.
6. Follow the procedures in this chapter to reassemble the front bezel,
routing and connecting cables as required.