Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 26)

Installing Your Hardware 2–5
Publication 2755-6.3
3. Connecting the Host Cable to the Base/Charger Unit
Use the appropriate host interface cable to connect the base/charger
unit.
Host Uses this cable type Catalog Number
DEC VT 2xx/3xx/4xx Wedge 2755-HCC-BV1-06
RS-232C devices that TxD
output on Pin 2, Female
connector. Examples include:
RB Module
PLC
R
model 5/11, 5/20,
5/30, 5/40L, 5/60L, or
5/80
SLC t model 5/03 ➀ or
5/04 ➀
RS-232C
2755-HCC-BR2-06
(TxD output on Pin 3, Male
connector.)
AB Workstation model
T-View
t ➀ , T70 ➀ or
T71 ➀
MessageView t ➀
2755-DS/DD Enhanced
Decoder Host Port
RS-232C device that TxD
output on Pin 3, Female
connector. Example
includes:
RS-232C
2755-HCC-BR1-06
(TxD output on Pin 2, Male
2708-DH5 Workstation
Communications Port
(TxD output on Pin 2, Male
connector.)
IBM AT/XT and clones
Dataliner t model DL 40
Wedge 2755-HCC-BP1-06
IBM PS/2 (and clones) model
30, 50, 55SX, 60, 70, or 80
Wedge 2755-HCC-BP2-06
➀ A 25-to-9 pin adapter is required to connect the host device to
the base/charger unit cable.