Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 31)

2–10 Installing Your Hardware
Publication 2755-6.3
6. Connecting the Power Supply to the Base/Charger Unit and
Power Receptacle
1. Connect the power supply to the power input port on the
base/charger unit.
Base/Charger
To Host
Power Supply
Power Input Port
To Power Receptacle
Enclosure
To Power Supply
2. Connect the power supply cable
(Renewal Part Nos. 77121-801-01, 77121-801-02, or
77121-801-03) to the power supply.
Note: The power supply cables are sold separately from the
power supply. Contact your local Allen-Bradley distributor to
order the power supply cables.
3. Connect the power supply to the appropriate receptacle supplying
the proper voltage level.
Power Supply Voltage Level
2755-HCP-D1 100–240V ac/50–60 Hz