Rockwell Automation 2755 Cordless Hand-Held Scanner - Manual (Page 37)

2–16 Installing Your Hardware
Publication 2755-6.3
9. Pairing the Scanner to the Base/Charger Unit
There is a 1-to-1 pairing of guns to bases. (You cannot have multiple
guns paired to one base or one gun paired to multiple bases.) To pair
the scanner with the base/charger unit:
1. Scan the Pairing Bar Code located on the base/charger unit.
Pairing Bar Code
2. Insert the scanner into the base/charger unit. You have 15
seconds to insert the scanner or you will hear 4 error beeps to
indicate unsuccessful pairing. Successful pairing is indicated by a
warble beep and an illuminated green LED on the scanner gun.
Note: You cannot scan data until pairing of the scanner with the
base/charger unit is complete.
Once the scanner is placed in the base/charger unit, information
(e.g., addressing, RF channels, etc.) is transferred between the
scanner and the base/charger unit.