Rockwell Automation 2706-P42R_P42C_P43R_P43C_P44R_P44C_P72CNx_P74CNx InView Marquee Message Display - Manual (Page 13)

Publication 2706-IN006E-EN-P
12 InView Marquee Message Display
4. Use chains (not supplied) to hang the signs from the ceiling.
Mounting Instructions
2706-P72 and 2706-P74
series NEMA 4 and 4x
models 1. Attach the two sign brackets to a wall, ceiling, or other surface.
Be sure to place the brackets so the bracket flanges face
appropriately as shown below. Mount the brackets the following
distance apart (measured from the center of the mounting holes
in each bracket):
2. Mount the sign on the sign brackets using the two large hex
bolts supplied.
Second
sign First
sign
Second
mounting
bracket First
mounting
bracket
Mounting
brackets
Second
sign
First
sign
TIP
Use chains capable of supporting 4 times the total
weight of the signs.
Wall
or
ceiling
Sign brackets, facing
in behind the sign
Sign brackets, facing
out from the sign
Mounted so flanges are hidden behind the sign
2706-P72CNx: 41.25 in (104.8 cm)
2706-P74CNx: 65.25 in (165.8 cm)
Mounted so flanges show on the sides of the sign
2706-P72CNx: 43.5 in (110.5 cm)
2706-P74CNx: 67.5 in (171.4 cm)
TIP
Do NOT install the sign directly to drywall or
plasterboard. The sign must be fastened to a surface
capable of supporting at least four times the weight
of the sign.