Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 12)

12 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Additional Resources These documents contain additional information concerning related
Rockwell Automation products
.
You can view or download publications at http://www.rockwellautomation.com/
literature/ . To order paper copies of technical documentation, contact your local
Rockwell Automation distributor or sales representative.
Resource Description
Ultra3000 Hardware Installation Manual, publication 2098 - IN003 Ultra3000 drive installation and programming procedures.
Ultra3000 SERCOS Integration Manual, publication 2098-IN005 How to configure the Ultra3000 SERCOS interface hardware with
the ControlLogix SERCOS module.
Ultra3000 DSD with DeviceNet Reference Manual, publication 2098-RM001 Object models for Ultra3000 DeviceNet applications.
Ultra5000 Hardware Installation Manual, publication 2098 - IN001 Ultra5000 drive installation and programming procedures.
Ultra5000 IPD with DeviceNet Reference Manual, publication 2098-RM002 How to configure and monitor the Ultra5000 drive using the
DeviceNet interface.
Kinetix 3 Component Servo Drive Installation Instructions, publication 2071-IN001 Information on installing your Kinetix 3 drive system.
Kinetix 3 Component Servo Drive Serial Host Command Reference Manual,
publication
2071-RM001
Information on the serial communication commands, both ASCII and
ModBus-RTU, for interfacing a motion controller with the Kinetix 3
drive.
Ultraware Programming Manual, publication 2098 - PM001 Information on programming the Ultra5000 using the Ultraware
programming environment. Intended for programmers with a basic
understanding of the C programming language.
Ultraware CD Installation Instructions, publication 2098 - IN002 Instructions for installing Ultraware software
System Design for Control of Electrical Noise Reference Manual,
publication
GMC-RM001
Information, examples, and techniques designed to minimize
system failures caused by electrical noise.
Kinetix Motion Control Selection Guide, publication GMC-SG001 Specifications, motor/servo-drive system combinations, and
accessories for Kinetix motion control products.
Motion Analyzer CD, download at http://www.ab.com/motion/software/
analyzer_download.html
Drive and motor sizing with application analysis software.
Rockwell Automation Configuration and Selection Tools,
website
http://www.rockwellautomation.com/en/e-tools
Online product selection and system configuration tools, including
AutoCAD (DXF) drawings.
Rockwell Automation Product Certification,
website
http://www.rockwellautomation.com/products/certification
Website for declarations of conformity (DoC) currently available
from Rockwell Automation.
National Electrical Code, published by the National Fire Protection Association of
Boston, MA An article on wire sizes and types for grounding electrical
equipment.
Rockwell Automation Industrial Automation Glossary, publication AG-7.1 A glossary of industrial automation terms and abbreviations.