Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 45)

Rockwell Automation Publication 9528-UM001C-EN-P - March 2014 45
Configure the Process Automation System Server (PASS) Chapter 2
Workgroup: Username: New_user_account
Password: Use the password you created with your
new_user_account. See
page 39 .
Domain: Use the username and password of the domain account.
5. Type the credentials for the local directory configuration and click Next.
The password verification occurs twice because you checked both the
Network and Local Directory checkboxes on the FactoryTalk Directory
Configuration Wizard.
It can take 30 seconds to process the request.
The network and local directory are now set up and are shown as being
configured successfully.
6. Click Close.