Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 32)

2–17 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
PanelView e Transfer Utility 32 (FTU32) Version 5 is provided on
the PanelBuilder 1400e CD-ROM. The software installation program
creates a directory on your hard drive for the FTU32 and copies all
necessary files to it. By default, the drive and directory is
C:\AB\PB1400E\FTU32. You can change this default.
You can also create your own floppy disks of the PanelView e
Transfer Utility 32 software from the CD this manual was on. For
instructions on how to create floppy disks of the software from the
CD, refer to the Floppies.txt file, in the root directory of the CD.
To install FTU32:
1. Start Windows 2000(SP2)/NT/95. If you’re already in Windows,
close all open Windows applications.
2. Insert the CD-ROM in the drive.
The CD-ROM begins to run automatically.
If the install does not start automatically, choose Run from the
Start button and select setup.exe from the CD-ROM drive; or
select setup.exe from Windows Explorer.
3. In the Welcome dialog box, choose Next.
4. If you are installing on Windows 95, the Select Version dialog
box appears.
Installing FTU32 from
PanelBuilder 1400e
CD-ROM on
Windows 2000(SP2)/NT/95