Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 34)

2–19 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
6. In the Choose Applications dialog box, choose to install the
Transfer Utility. You can choose to install more than one
application. Then choose Next.
7. In the registration window, enter your user name, company name,
and serial number. You can obtain registration information from
the software registration card that is in your PanelBuilder 1400e
package (A-B Catalog Number 2711E-ND1) or Transfer Utility
package (A-B Catalog Number 2711E-ND7). Choose Next.
8. In the confirmation window, verify the user information you have
entered. Select Yes to proceed or No to edit the user information.
9. The Welcome dialog box for the Transfer Utility recommends
that you close all open Windows applications. If you have done
that, choose Next.
If you have chosen to install more than one application, the first
selected application begins installing automatically.
10. Choose the drive and directory in which the FTU32 will be
installed. By default, this is C:\AB\PB1400E\FTU32. To change
the destination drive or directory, type the new drive and/or
directory in the Program Files box. Or, click the Browse button to
select an installation directory. Then choose Next.