Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual User Manual
Page 57
3–11
Uploading 1000e/1200e/1400e Application Files and Alarm History Files
4. When you have selected the required settings, choose OK to exit
this screen.
5. To upload the terminal’s alarm history serially, in the Terminal
Configuration screen, choose the Transfer Application button to
display the Transfer Application screen.
To prepare the PanelView terminal for a network or Remote I/O
Pass-Through upload:
1. Ensure the alarm history file to be uploaded is the Current
Application in the PanelView terminal. The Current Application
is a file that is currently selected and running on the PanelView
terminal. If you do not want to make changes to the Current
Application’s transfer parameters, follow the next procedure to
configure the Transfer Utility for an upload.
If you want to change the Current Application’s transfer
parameters, switch the PanelView terminal to Configure mode,
using the hardware keyswitch or the Goto Configure Mode
button.