Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 80)

5–8 Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
Serial Transfer Method — Driver Configuration
When you select Serial as the transfer method, the driver is the only
option you can configure.
To select the driver:
1. Click the Refresh List button to refresh the list of drivers.
2. Select a serial driver from the list of available drivers.
Driver options are Serial 1 or Serial 2. Serial 1 and Serial 2
drivers enable you to configure two different serial setups (for
example, baud rates). Also, they can accommodate the two
communication ports on many computers. Refer to the physical
communication ports on your computer to determine the correct
port for your application.