Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 50)

Configuring the Scanner 4–3
Publication 2755-6.4
Configuration Parameters
Programming
Guide Reference
Default Setting
Code Lengths
Code 39 – Any Length None 1-10
Code 39 – Length Within Range Range (1-55) 1-10
Code 39 – 1 Discrete Length None 1-10
Code 39 – 2 Discrete Lengths None 1-10
Codabar – Any Length Range (2-55) 1-11
Codabar – Length Within Range Range (2-55) 1-11
Codabar – 1 Discrete Length None 1-11
Codabar – 2 Discrete Lengths None 1-11
Interleaved 2 of 5 – Any Length Range (2-54) 1-12
Interleaved 2 of 5 – Length Within Range None 1-12
Interleaved 2 of 5 – 1 Discrete Length 14 1-12
Interleaved 2 of 5 – 2 Discrete Lengths None 1-12
Data Format Options
Prefix/Suffix Enter 1-14
Data Transmission Format <Data> As Is 1-16
Transmit No Read Message Disabled 1-17
Transmit LRC Checksum Disabled 1-17
Transmit Code ID Character Disabled 1-18
Decode Options
Beep After Good Decode Enabled 1-19
Beeper Tone High 1-19
Decode Buffering Disabled 1-19
Pause Duration 0.0 seconds 1-20
Decode Attempt Duration 5 seconds 1-20
Scanning Options
Smart Raster Mode Enabled 1-22
Hand-Held Options Slab Raster 1-22