Rockwell Automation System Release 3.0 PlantPAx System Application Templates Quick Start - Manual (Page 14)

14 Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013
Chapter 1 Configure the Controller Application
Modify Controller Properties
Follow these steps to modify the controller properties to associate the template to the target controller.
1. From the Edit menu, choose Controller Properties.
2. On the Controller Properties dialog box, type the name of the controller, slot number, and chassis type for the
target controller.
3. Click Change Controller if your controller is not the type or firmware revision shown. Otherwise, skip to step 8 .