Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 119)

Editing Event and Production Data Chapter 8
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 119
NOTES
The Category - Name field is disabled if the event configuration
restrictions are not fulfilled.
The event category can be changed only based on the existing
list of categories. The list of available event categories is
associated with the current activity area.
4. Click Save to save the modified event.
The change of the event category affects:
• The reason code.
• The reporting value.
• The event values.
The change of the event category results also in the change of a
Value Lookup List if the list has been configured in Configuration
Console for the selected event. If the changed Value Lookup List is
different than the original one, new start and end values need to be
selected from it. The Value Lookup List is represented with the
Start Value and End Value lists.
IMPORTANT
Changing the event category results in re-evaluating the information on
machine states, as well as updating the event sequence, severity level,
and fault metric according to the new event configuration.
There are several restrictions related to editing the start/end time of
events. You can change the start/end time provided that the event
configuration fulfills the following conditions:
• It is user-defined.
• It is not active (i.e., it is not currently processed by the
FactoryTalk Metrics server).
• Its trigger type is one of the following:
• Monitored Bit Low to High.
• Monitored Bit High to Low.
Editing the Start/End Time