Rockwell Automation FactoryTalk Report Expert User Guide - Manual (Page 43)

Understanding Report Templates Chapter 5
Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 43
The Uptime vs. Downtime widget displays the total uptime and
total downtime (in minutes) as a vertical bar chart. If shift is
configured for the selected work cell(s), and more than one shift is
included in the time selection, the data is grouped by shift.
The Machine States widget displays total time (in minutes) in each
of the defined machine states in pie chart format.
Machine states are not configured so you must configure them
manually. If you do not configure machine states, this widget will
not contain data. For information on configuring machine states,
refer to the
FactoryTalk Metrics User Guide.
The Event Count and Duration widget displays information for
user-defined events, including the event name, total event duration
(in minutes), and total event count. Duration is shown as a vertical
bar chart, and event count as a line. The chart is grouped by event
category and event name within each category.
Uptime vs. Downtime Widget
Machine States Widget
Event Count and Duration
Widget