Replacing the battery – Brother BCL-D60 User Manual

Page 36

Advertising
background image

Chapter 4

25

Clean the charger contacts as follows:

4

a

Unplug the cradle from the AC power
outlet.

b

Clean the charger contacts (1) for both
the cordless handset and the cradle with
a cotton swab.

Replacing the battery

4

If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.

WARNING

Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.

CAUTION

DO NOT take off the white plastic that
covers the battery.

a

Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.

b

Remove the old battery and pull out the
connector.

c

Insert the connector (1) of the new
battery (2) in the direction shown below.

d

Place the battery in the correct position.

e

Slide the battery cover back on.

Note

• Be careful that you do not catch the

battery connector cord.

• After battery replacement, you should set

the date and time. (See Date and
Time
on page 20.)

f

Charge the battery for 12 hours. (See
Charging the battery on page 24.)

1

1

2

1

2

Advertising
This manual is related to the following products: