Brother DCP-8155DN - Manual (Page 109)

ControlCenter4
101
4
Quick reference for scanning operation
4
This section introduces an example operation of scanning a PDF file using (File) in Advanced Mode. If
you want to change your machine’s SCAN key or Scan on the touchscreen for Scan to PC settings using
ControlCenter4, see Changing the Scan key settings for Scan to PC menu uu page 104.
Note
The screens on your PC may vary depending on your model.
a Load your document.
b Open ControlCenter4 by clicking Start/All Programs/Brother/MFC-XXXX (where MFC-XXXX is your
model name)/ControlCenter4. The ControlCenter4 application will open.
c Choose Advanced Mode before you use ControlCenter4.
d
Make sure the machine you want to use is selected from the Model pull-down list.