Cabletron Systems SFCS-200WG - Manual (Page 21)

1-7
Introduction
1.2.7 Standards Compliance
• ITU I.361 ATM Layer
• ATM Forum UNI 3.0
1.2.8 Safety Compliance
• US: UL 1950
• Canada: CSA 22.2 No. 950-M89
• Europe: EN 60950
1.2.9 Emissions Compliance
• FCC Part 15, Class A
• CISPR 22, Class A
• VCCI, Class 1
1.2.10 Electromagnetic Compatibility (EMC)
The following all comprise EN 50082-1:
• ESD Susceptibility: IEC 801-2, Level 3
• Radiated Susceptibility: IEC 801-3, Level 2
• Electrical Fast Transient Compatibility: IEC 801-4, Level 2
1.3 Software Description
The software for the 9A000 and SFCS series runs on a FLASH file system to
accomplish switch and connection management, IP connectivity, and SNMP
network management.
1.3.1 Switch Control Software
The Switch Control Software (SCS) is the “brains” of the 9A000 and
SFCS series switches. The SCS controls the 9A000 and SFCS series switch
board and handles connection set-up and tear-down duties. The SCS can also
communicate with other Cabletron Systems switches using the SPANS NNI
protocol to learn network topology and establish connections across multiple
switches. In addition, there is an SNMP agent built into the SCS to allow
SNMP management and control.