Cabletron Systems SFCS-200WG - Manual (Page 28)

3-2
Switch Hardware
3.1 Switch Hardware Configurations
The SFCS-200WG, as shown in Figure 3.1, is a self-contained ATM switch that
provides an Ethernet connection for network management access. The
SFCS-200WG ATM switch hardware consists of a single switch board with an
i960 SCP, network modules, and fans. These components work together to
provide ATM switching capabilities, as well as distributed connection setup
and management.
Figure 3.1 - SFCS-200WG Switch Configuration
The SFCS-200BX, as shown in Figure 3.2, is a self-contained ATM switch that
provides an Ethernet connection for network management access. The
SFCS-200BX hardware consists of a single switch board with an i960 SCP, net-
work modules, redundant power supplies, and fans. These components work
together to provide ATM switching capabilities, as well as distributed connec-
tion setup and management.
-
NEXT SELECT
RESET
PWR Tx
C
Rx
L
ETH SER
TX2
RX2
TX4
RX4
TX3
RX3
TX1
RX1
TX2
RX2
TX4
RX4
TX3
RX3
TX1
RX1
TX2
RX2
TX4
RX4
TX3
RX3
TX1
RX1
TX2
RX2
TX4
RX4
TX3
RX3
TX1
RX1
SecureFast SFCS-200WG SYSTEMS
5 VOLT
RESET
PWR
SER NEXT SELECT
Tx
C
Rx
L
ETH