Switch setup, 1 introduction, 2 unpacking – Cabletron Systems SFCS-200WG User Manual
Page 51: Chapter 4, 2 unpacking -1
4-1
CHAPTER 4
Switch Setup
This chapter describes how to handle and set up a Cabletron ATM switch
prior to its operation.
4.1
Introduction
Before installing a Cabletron ATM switch, there are several important factors
that must be taken into consideration, depending on the type of installation
site. The following sections discuss in detail how to install a Cabletron ATM
switch and any prerequisites to the installation.
NOTE:
It is important to read through the ENTIRE
installation procedure before attempting to
turn on the power to the unit.
4.2
Unpacking
Upon receipt of, and before opening your Cabletron ATM switch, inspect the
package for any damage that may have occurred during shipping. If the pack-
age shows any signs of external damage or rough handling, notify your car-
rier’s representative.
When unpacking your Cabletron ATM switch, be sure to keep all original
packing materials. They may be needed for storing, transporting, or returning
the product.