Cabletron Systems SFCS-200WG - Manual (Page 54)

4-4
Switch Setup
4.4 Rack-Mounting an SFCS-200BX
The SFCS-200BX is designed to be installed either as a stand-alone unit placed
on the desktop, or as a rack-mounted unit using the included rack-mount kit
(refer to section 4.2.1). The following items should be addressed when rack-
mounting this switch:
WARNING! When rack-mounting equipment, make sure
that a hazardous condition is not created due
to uneven weight distribution.
CAUTION To prevent damage to your equipment,
Cabletron Systems recommends that the max-
imum operating temperature not exceed 40˚C.
Consideration must be made if the switch is to
be installed in a closed or multi-unit rack
assembly, because the ambient temperature of
the rack environment may be greater than the
room ambient temperature.
CAUTION Take care not to block the air vents of the
switch, as this would compromise the amount
of air flow required for proper cooling.
4.4.1 Required Tools
A set of rack-mount brackets, a cable relief strain rail, and 6 Phillips-head
screws are supplied with each SFCS-200BX for rack-mounting the unit. You
will need to supply a Phillips screwdriver.
WARNING! To prevent user injury and possible damage to
equipment, Cabletron Systems recommends
that at least two people be present when rack-
mounting the SFCS-200BX.