Personal profile – BMW X5 User Manual
Page 35
New remote controls
New remote controls are available from the
service center.
Loss of the remote controls
Lost remote controls can be blocked by your
service center.
Emergency detection of remote
control
It is possible to switch on the ignition or start
the engine in situations such as the following:
▷
Interference of radio transmission to re‐
mote control by external sources.
▷
Discharged battery in the remote control.
▷
Interference of radio transmission by mo‐
bile devices in close proximity to the re‐
mote control.
▷
Interference of radio transmission by
charger while charging items such as mo‐
bile devices in the vehicle.
A Check Control message is displayed if an at‐
tempt is made to switch on the ignition or start
the engine.
Starting the engine with emergency
detection of the remote control
If a corresponding Check Control message ap‐
pears, hold the remote control vertically
against the marked area on the steering col‐
umn and press the Start/Stop button within
10 seconds while pressing the brake.
Personal Profile
The concept
You can set several of your vehicle's functions
to suit your personal needs and preferences.
▷
The settings are automatically saved in the
profile currently activated.
▷
The remote control used is detected when
the vehicle is unlocked and the stored pro‐
file is called up.
▷
Your personal settings will be recognized
and called up again even if the vehicle has
been used in the meantime by someone
else with another remote control.
The individual settings are stored for three
Personal Profiles and one guest profile.
Transmitting the settings
Your personal settings can be taken with you
to another vehicle equipped with the Personal
Profile function. Additional information is avail‐
able from the service center.
Transmission takes place via:
▷
The USB interface in the center armrest
onto a USB device.
▷
BMW Online.
Profile management
Opening the profiles
A different profile can be called up than the
one associated with the remote control cur‐
rently in use.
1.
"Settings"
2.
"Profiles"
3.
Select a profile.
Called up profile is assigned to the remote
control being used at the time.
Seite 35
Opening and closing
Controls
35
Online Edition for Part no. 01 40 2 926 740 - X/13