Alarm system – BMW X5 User Manual

Page 45

Advertising
background image

Retrieving the seat, mirror, and

steering wheel settings

The driver's seat, exterior mirror, and steering
wheel positions selected last are stored for the
currently used remote control.
When the vehicle is unlocked, these positions
are automatically retrieved if this function was
activated.

Pinch hazard when moving back the seat
If this function is used, first make sure

that the footwell behind the driver's seat is
empty. Otherwise, people can be injured or ob‐
jects damaged when the seat is moved back.◀

The adjustment procedure is interrupted:

When a seat position switch is pressed.

When a button of the seat, mirror, and
steering wheel memory is pressed briefly.

Activating the setting

1.

"Settings"

2.

"Doors/key"

3.

"Last seat position autom."

Alarm system

The concept

The vehicle alarm system responds to:

Opening of a door, the hood or the tailgate.

Movements in the vehicle.

Changes in the vehicle tilt, e.g., during at‐
tempts to steal a wheel or when towing the
car.

Interruptions in battery voltage.

The alarm system briefly indicates tampering:

By sounding an acoustic alarm.

By switching on the hazard warning sys‐
tem.

By flashing the high beams.

Arming and disarming the alarm

system

General information

When you lock or unlock the vehicle, either
with the remote control or via the Comfort Ac‐
cess at the door lock, the alarm system is
armed or disarmed at the same time.

Door lock and armed alarm system

The alarm system is triggered when the door is
opened, if the vehicle is unlocked via the door
lock.
In order to terminate this alarm, unlock vehicle
with the remote control or switch on the igni‐
tion, if necessary, by emergency detection of
the remote control.

Tailgate and armed alarm system

The tailgate can be opened even when the
alarm system is armed.

Press the button on the remote con‐
trol for approx. 1 second.

After the tailgate is closed, it is locked and
monitored again if the doors are locked. The
hazard warning system flashes once.
In some vehicle equipment variants, the tail‐
gate can only be opened using the remote
control if the vehicle was unlocked first.

Panic mode

You can trigger the alarm system if you find
yourself in a dangerous situation.

Press the button on the remote con‐
trol for at least 3 seconds.

To switch off the alarm: press any button.

Switching off the alarm

To terminate the alarm:

Unlock the vehicle using the remote con‐
trol.

Seite 45

Opening and closing

Controls

45

Online Edition for Part no. 01 40 2 926 740 - X/13

Advertising
This manual is related to the following products: