Top view – BMW 2007 bmw 328i User Manual

Page 126

Advertising
background image

Top View

The concept

Top View assists you in parking and maneuver‐
ing. The area around the doors and the road area
around the vehicle are shown on the Control
Display for this purpose.

Capturing the image

The image is captured by two cameras
integrated in the exterior mirrors and by the
backup camera.
The range is at least 7 ft/2 m to the side and rear.
In this way, obstacles up to the height of the ex‐
terior mirrors are detected early.

System limits

Top View cannot be used in the following situa‐
tions:

With a door open.

With the trunk lid open.

With an exterior mirror folded in.

In poor light.

A Check Control message is displayed in some
of these situations.

Check the traffic situation as well
Check the traffic situation around the ve‐

hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the cameras.◀

Switching on automatically

Select transmission position R with the engine
running.
The Top View and PDC images are displayed if
the system is switched on via iDrive.

Automatic deactivation during forward

travel

The system switches off when a certain driving
distance or speed is exceeded.

Switch the system back on if necessary.

Switching on/off manually

Press the button.

On: the LED lights up.

Off: the LED goes out.

If Top View is displayed, switch on the backup
camera via the iDrive, refer to page

127

.

Visual warning

The approach of the vehicle to an object can be
shown on the Control Display.
When the distance to an object is small, a red bar
is shown in front of the vehicle, as it is in the PDC
display.

The display appears as soon as Top View is ac‐
tivated.

If the backup camera image was selected last, it
again appears on the display. To switch to Top
View:

"Rear view camera" Select the symbol on

the Control Display.

Seite 126

Controls

Driving comfort

126

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

Advertising
This manual is related to the following products: